Flexo Care Label Printing Ink (Flexo printing dense white on black ribbon)

• Customization: Available
• Type: Solvent Based Ink
• Printing Type: Flexo Printing
• Model NO.: FMC- 1090
• Performance: Dry
• Transport Package: Plastic Tin
• Specification: kg
• Trademark: MONEL
• Origin: China
• HS Code: 3215110010
• Production Capacity: 5000ton

Product Description

   



Monal Series Flexographic Label Inks

★ Ink features:
Low odor, strong ink tinting strength, smooth ink surface, pure color, bright color, good flexographic inking, moderate drying speed. print
The product is resistant to washing without fading, can withstand strong water washing, stone washing, enzyme washing, etc., and can completely replace similar imported inks.

★ Safety Standards:
Passed the Oeko-Tex 100 certification, passed the EU RoHS environmental protection standard test, and passed the US EN71-PART3 test. without Fore
Marin, APEO-free, phthalate-free plasticizer, PVC-free, in line with European and American environmental protection and non-toxic standards.

★ Scope of application:
Applicable to all flexographic fabric printing machines, the substrates are various textile and chemical fiber products, fabrics, trademarks, marks, ribbons, snow
Yarn tape, thread tape, etc.

★ Instructions for use:
1. Please fully stir the ink before use;
2. Please use special diluent, and the amount of dilution should be adjusted within 3-10%;
3. In order to improve the adhesion, 3-10% of the special hardener (SNK-512A) can be added. After adding, it must be fully stirred.
The usable time is 4 hours (otherwise it will be unusable due to the curing of the ink, so please be careful not to mix too much at one time),
Sufficient drying is required after printing;
4. The conventional drying method is: hot air blowing and drying. After the printed trademark tape is fixed in a constant temperature oven, it can reach a very high level.
Color fastness. Ribbon and edging tape are placed in an oven at 60~80 degrees for 2 hours (100 degrees for 1 hour), nylon, cotton tape, polyester
It can be dried in an oven at 80~90 degrees for 2~3 hours to achieve high water resistance and dry cleaning resistance. Ink drying, adhesion
The characteristics of the adhesion and ink film are related to the drying temperature and time;

FAQ

1. who are we?
We are based in Shanghai, China, start from 2010,sell to Domestic Market(70.00%),Eastern Asia(20.00%),South Asia(10.00%). There are total about null people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
inks

4. why should you buy from us not from other suppliers?
null

5. what services can we provide?
Accepted Delivery Terms: null;
Accepted Payment Currency:null;
Accepted Payment Type: null;
Language Spoken:null