Printing Ink Used for Glass Surface

• Customization: Available
• Type: Solvent Based Ink
• Printing Type: Screen Printing
• Model NO.: ML SERIES
• Performance: Dry
• Transport Package: Plastic Tin
• Specification: kg
• Trademark: MONEL
• Origin: China
• HS Code: 3215110010
• Production Capacity: 5000ton

Product Description

   



ML Series Glass Metal Inks

★ Ink features:
1. Single-liquid low temperature baking type;
2. Low odor, good gloss, smooth and bright surface;
3. It has good chemical resistance and alcohol resistance, and has excellent adhesion and covering power on glass and metal;
4. It has excellent flexibility and can provide good post-processing for metal products.

★ Scope of application:
It is specially used for screen printing of glass and various metal products of household appliances such as refrigerator/freezer doors and microwave oven panels.

★Safety Standard:
Passed the EU ROHS environmental protection standard test, passed the European regulation EN71-PART3 test.

★ Product properties:
Test item Test method and condition Test result
Adhesion (100 grids) 3M 610 tape was pulled three times, 100/100 qualified
Adhesion (notched nail scraping) Scratch the notch and scrape it hard with the fingernail without falling off
Pencil hardness PPH-1 pencil hardness tester (1kg), using Mitsubishi unix pencil H
Abrasion resistance 74# like skin load 500gf, no bottom after 100 times of reciprocating rubbing
Water resistance immersed in tap water at room temperature for 1 week, no abnormality
Boiling water resistance Continuous immersion in boiling water at 100°C for 1 hour, take out for adhesion test, no abnormality
Alcohol resistance Use 99.5% ethanol, wipe with cotton cloth 100 times without bottom
Gasoline resistance 93# gasoline load 500gf, no bottom after 100 times of reciprocating wiping
Butanone-resistant pure MEK solvent, wipe with cotton cloth 30 times without bottom
Acid resistance Soak in 5% H2SO4 aqueous solution for 24 hours, no abnormality
Alkali resistance Soaked in 5% NaOH aqueous solution for 24 hours, no abnormality
Weather resistance 400W UV lamp, 30CM distance, irradiated for 48 hours △E≤3.0, no change
[Test conditions] This test was conducted using white ink on a tempered refrigerator glass door.
Screen: 300 mesh screen, film thickness 25µm; single-cut printing; forced drying at 170ºC×30 minutes.
[Test method] The printed and dried samples were cooled and tested directly.
[Special Instructions] The above test results are based on the company's environment and are not guaranteed values. They are for reference only.

★ Notes:
1. Please ensure that the surface of the glass material is clean before using this product;
2. Please use special diluent when diluting, not mix with other ink or solvent;
3. Due to different printing materials and operating environments, the reference heating temperature and time will change. Please be sure to do relevant tests and confirm before using in batches.
4. When using this product, be sure to ask for the specified MSDS, read it carefully and understand the responsibilities of the user before using it.

Shelf life:
2 years from the date of production, after opening, it is recommended to use as soon as possible.
Package:
1kg/barrel, 4kg/barrel, 5kg/barrel.

important:
Different batch numbers or different manufacturers produce materials with different suitability for ink, and mass production is required after trial printing.

Note: The relevant data is measured under specific printing conditions, for reference only, not as guaranteed data


 

FAQ

1. who are we?
We are based in Shanghai, China, start from 2010,sell to Domestic Market(70.00%),Eastern Asia(20.00%),South Asia(10.00%). There are total about null people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
inks

4. why should you buy from us not from other suppliers?
null

5. what services can we provide?
Accepted Delivery Terms: null;
Accepted Payment Currency:null;
Accepted Payment Type: null;
Language Spoken:null